 |
 |
 |
 |
| Summa S75 |
Summa S120 |
Summa S140 |
Summa S160 |
| 75 cm (30 in.) drag-knife, friction feed |
120 cm (48 in.) drag-knife, friction feed |
140 cm (54 in.) drag-knife, friction feed |
160 cm (64 in.) drag-knife, friction feed |
| Up to 1000 mm/sec. (40 in./sec.) axial;
Up to 1414 mm/sec. (56 in./sec) diagonal |
Up to 1000 mm/sec. (40 in./sec.) axial;
Up to 1414 mm/sec. (56 in./sec) diagonal |
Up to 1000 mm/sec. (40 in./sec.) axial;
Up to 1414 mm/sec. (56 in./sec) diagonal |
Up to 1000 mm/sec. (40 in./sec.) axial;
Up to 1414 mm/sec. (56 in./sec) diagonal |
| 74.2 cm x 50 m (29.2 in. x 164 ft.) maximum |
120 cm x 50 m (47.2 in. x 164 ft.) maximum |
135 cm x 50 m (53.1 in. x 164 ft.) maximum |
158 cm x 50 m (62.2 in. x 164 ft.) maximum |
| Up to 4 g axial;
Up to 5.5 g diagonal |
Up to 4 g axial;
Up to 5.5 g diagonal |
Up to 4 g axial;
Up to 5.5 g diagonal |
Up to 4 g axial;
Up to 5.5 g diagonal |
| 0-400 grams, in 5-gram increments |
0-400 grams, in 5-gram increments |
0-400 grams, in 5-gram increments |
0-400 grams, in 5-gram increments |
| 0.025 mm, 0.1 mm selectable (Metric);
0.001 in., 0.005 in. selectable (English) |
0.025 mm, 0.1 mm selectable (Metric);
0.001 in., 0.005 in. selectable (English) |
0.025 mm, 0.1 mm selectable (Metric);
0.001 in., 0.005 in. selectable (English) |
0.025 mm, 0.1 mm selectable (Metric);
0.001 in., 0.005 in. selectable (English) |
| Within +/- 0.1 mm (0.004 in.) on plots up to 12 m (40 ft.) long |
Vinyl =/< 76 cm (30 in.):
Within +/- 0.1 mm (0.004 in.) on plots up to 12 m (40 ft.) long;
Vinyl > 76 cm (30 in.):
Within +/- 0.1 mm (0.004 in.) on plots up to 4 m (13 ft.) long |
Vinyl =/< 76 cm (30 in.):
Within +/- 0.1 mm (0.004 in.) on plots up to 12 m (40 ft.) long;
Vinyl > 76 cm (30 in.):
Within +/- 0.1 mm (0.004 in.) on plots up to 4 m (13 ft.) long |
Vinyl =/< 76 cm (30 in.):
Within +/- 0.1 mm (0.004 in.) on plots up to 12 m (40 ft.) long;
Vinyl > 76 cm (30 in.):
Within +/- 0.1 mm (0.004 in.) on plots up to 4 m (13 ft.) long |
| Standard knife for vinyl, reflective and fluorescent films;
Thick material knife for sandblast resist and other thick films;
Pen for plotting on paper;
Pounce tool for pouncing on paper |
Standard knife for vinyl, reflective and fluorescent films;
Thick material knife for sandblast resist and other thick films;
Pen for plotting on paper;
Pounce tool for pouncing on paper |
Standard knife for vinyl, reflective and fluorescent films;
Thick material knife for sandblast resist and other thick films; Pen for plotting on paper;
Pounce tool for pouncing on paper |
Standard knife for vinyl, reflective and fluorescent films;
Thick material knife for sandblast resist and other thick films;
Pen for plotting on paper;
Pounce tool for pouncing on paper |
| 6 to 84 cm (2.4 to 33 in.) |
11.5 to 130 cm (4.5 to 51 in.) |
17 to 145 cm (6.7 to 57 in.) |
17 to 168 cm (6.7 to 66 in.) |
| 50 m (164 ft.) maximum |
50 m (164 ft.) maximum |
50 m (164 ft.) maximum |
50 m (164 ft.) maximum |
| Up to 0.25 mm (0.01 in.) with standard knife;
Up to 0.8 mm (0.03 in.) with thick material knife |
Up to 0.25 mm (0.01 in.) with standard knife;
Up to 0.8 mm (0.03 in.) with thick material knife |
Up to 0.25 mm (0.01 in.) with standard knife;
Up to 0.8 mm (0.03 in.) with thick material knife |
Up to 0.25 mm (0.01 in.) with standard knife;
Up to 0.8 mm (0.03 in.) with thick material knife |
| 16 MB |
16 MB |
16 MB |
16 MB |
| USB 1.1 and Serial RS-232C |
USB 1.1 and Serial RS-232C |
USB 1.1 and Serial RS-232C |
USB 1.1 and Serial RS-232C |
| English; French; German; Dutch; Italian; Spanish; Polish |
English; French; German; Dutch; Italian; Spanish; Polish |
English; French; German; Dutch; Italian; Spanish; Polish |
English; French; German; Dutch; Italian; Spanish; Polish |
| Summa DM/PL, HP-GL or HP-GL2 (with selectable origin ; HP7475 and HP 7580/7585) |
Summa DM/PL, HP-GL or HP-GL2 (with selectable origin ; HP7475 and HP 7580/7585) |
Summa DM/PL, HP-GL or HP-GL2 (with selectable origin ; HP7475 and HP 7580/7585) |
Summa DM/PL, HP-GL or HP-GL2 (with selectable origin ; HP7475 and HP 7580/7585) |
| 100-240 Vac, 48-62 Hz, 85 VA maximum |
100-240 Vac, 48-62 Hz, 85 VA maximum |
100-240 Vac, 48-62 Hz, 85 VA maximum |
100-240 Vac, 48-62 Hz, 85 VA maximum |
| 15° to 35° Celsius (59° to 95° Fahrenheit);
35 to 80% relative humidity (non-condensing) |
15° to 35° Celsius (59° to 95° Fahrenheit);
35 to 80% relative humidity (non-condensing) |
15° to 35° Celsius (59° to 95° Fahrenheit);
35 to 80% relative humidity (non-condensing) |
15° to 35° Celsius (59° to 95° Fahrenheit);
35 to 80% relative humidity (non-condensing) |
| 141 x 68 x 111 cm (55.5 x 26.8 x 43.7 in.) |
187 x 68 x 111 cm (73.6 x 26.8 x 43.7 in.) |
202 x 68 x 111 cm (79.5 x 26.8 x 43.7 in.) |
225 x 68 x 111 cm (88.6 x 26.8 x 43.7 in.) |
| 69 kg (152 Lbs.) |
86 kg (190 Lbs.) |
98 kg (214 Lbs.) |
114 kg (251 Lbs.) |
| 2 standard knife blades
Standard blade holder
Fiber tip pen
Power cord
Serial interface cable (PC) and USB Cable (PC/Mac)
Quick start guide (English, French, German, Italian, Spanish and Dutch)
User's manual and drivers on CD-ROM
Summa Cutter Control™ software (for controlling cutter settings)
WinPlot™ (PC) and MacSign Cut (Mac) cutting programs
Cutting plug-in for CorelDRAW 10 thru X3 and Illustrator CS and CS2 |
2 standard knife blades
Standard blade holder
Fiber tip pen
Power cord
Serial interface cable (PC) and USB Cable (PC/Mac)
Quick start guide (English, French, German, Italian, Spanish and Dutch)
User's manual and drivers on CD-ROM
Summa Cutter Control™ software (for controlling cutter settings)
WinPlot™ (PC) and MacSign Cut (Mac) cutting programs
Cutting plug-in for CorelDRAW 10 thru X3 and Illustrator CS and CS2 |
2 standard knife blades
Standard blade holder
Fiber tip pen
Power cord
Serial interface cable (PC) and USB Cable (PC/Mac)
Quick start guide (English, French, German, Italian, Spanish and Dutch)
User's manual and drivers on CD-ROM
Summa Cutter Control™ software (for controlling cutter settings)
WinPlot™ (PC) and MacSign Cut (Mac) cutting programs
Cutting plug-in for CorelDRAW 10 thru X3 and Illustrator CS and CS2 |
2 standard knife blades
Standard blade holder
Fiber tip pen
Power cord
Serial interface cable (PC) and USB Cable (PC/Mac)
Quick start guide (English, French, German, Italian, Spanish and Dutch)
User's manual and drivers on CD-ROM
Summa Cutter Control™ software (for controlling cutter settings)
WinPlot™ (PC) and MacSign Cut (Mac) cutting programs
Cutting plug-in for CorelDRAW 10 thru X3 and Illustrator CS and CS2 |
